Search Reported Parts

Search Companies

Search Member Inventories

Glossary

 



Glossary Index

A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | ALL


N
NDAA 2012 Section 818

DOD Section 818
Section 818

(1.) Directs the Secretary to assess DOD acquisition policies and systems for the detection and avoidance of counterfeit electronic parts. (2.) Outlines specific actions to be taken by the Secretary following such assessment, including revising the DOD Supplement to FAR to address such detection and avoidance. (3.) Provides contractor responsibilities relating to such detection and avoidance. (4.) Requires DOD contractors and subcontractors at all tiers, whenever possible, to obtain electronic parts from trusted suppliers (as compiled by DOD). (5.) Requires any DOD contractor or subcontractor who becomes aware of or has reason to suspect that any end item, component, part, or material contained in supplies purchased by DOD is counterfeit to report such fact to appropriate government authorities and the Government-Industry Data Exchange Program. (6.) Directs the Secretary of Homeland Security to establish a methodology for the targeting of imported electronic parts as counterfeit sources. (7.) Requires the DOD Secretary to implement a program to enhance contractor detection and avoidance of counterfeit electronic parts. (8.) Amends the federal criminal code to provide criminal penalties for the intentional trafficking in counterfeit military goods or services. (9.) Requires the Attorney General to include in an annual report to Congress on Department of Justice (DOJ) business all DOJ actions taken with respect to such trafficking.
Source: GovTrack Website.
NDE

NDI
NDT
Nondestructive Evaluation
Nondestructive Inspection
Nondestructive Testing

Can also be described as Nondestructive Inspection (NDI) or Nondestructive Evaluation (NDE). NDT encompasses a wide variety of analytical techniques used in science and industry to evaluate the properties of materials, components, subcomponents, or systems without damaging or permanently altering them.
Source: SAE Aerospace Standard AS6081 Fraudulent/Counterfeit Electronic Parts: Avoidance, Detection, Mitigation, and Disposition – Distributors
NDI

NDE
NDT
Nondestructive Evaluation
Nondestructive Inspection
Nondestructive Testing

Can also be described as Nondestructive Inspection (NDI) or Nondestructive Evaluation (NDE). NDT encompasses a wide variety of analytical techniques used in science and industry to evaluate the properties of materials, components, subcomponents, or systems without damaging or permanently altering them.
Source: SAE Aerospace Standard AS6081 Fraudulent/Counterfeit Electronic Parts: Avoidance, Detection, Mitigation, and Disposition – Distributors
NDT

NDE
NDI
Nondestructive Evaluation
Nondestructive Inspection
Nondestructive Testing

Can also be described as Nondestructive Inspection (NDI) or Nondestructive Evaluation (NDE). NDT encompasses a wide variety of analytical techniques used in science and industry to evaluate the properties of materials, components, subcomponents, or systems without damaging or permanently altering them.
Source: SAE Aerospace Standard AS6081 Fraudulent/Counterfeit Electronic Parts: Avoidance, Detection, Mitigation, and Disposition – Distributors
New


(1.) Electronic Components that have not been previously used in any capacity.
(2.) Goods that are free of any physical defects such as: scratches, test marks, third party markings, programs or bent leads. (The leads on NEW parts should be in pristine condition; this does not mean refurbished, if the leads have been retinned / refurbished, they should be classified as refurbished.)
(3.) New product should be packaged in the original manufacturers packaging (tubes, trays, reels, or as is specified by the manufacturer). This does not mean the original factory box OR factory sealed.
(4.) Components in tubes and in trays should have the same date code, lot code and country of origin. Components on a reel should have the same date code, lot code and country of origin unless otherwise specified on the original factory label. (i.e., as was packaged by the original manufacturer) A distributor can sell more than one date code in a shipment, however all components in a single tube, tray or reel, etc., should contain a consistent date code, (including week code and lot code) and country of origin.
(5.) New product does not need to be factory sealed in order to meet the industry standard definition of "new". However, moisture sensitive and static sensitive devices should be packaged in the proper ESD packaging material.
Nondestructive Evaluation

NDE
NDI
NDT
Nondestructive Inspection
Nondestructive Testing

Can also be described as Nondestructive Inspection (NDI) or Nondestructive Evaluation (NDE). NDT encompasses a wide variety of analytical techniques used in science and industry to evaluate the properties of materials, components, subcomponents, or systems without damaging or permanently altering them.
Source: SAE Aerospace Standard AS6081 Fraudulent/Counterfeit Electronic Parts: Avoidance, Detection, Mitigation, and Disposition – Distributors
Nondestructive Inspection

NDE
NDI
NDT
Nondestructive Evaluation
Nondestructive Testing

Can also be described as Nondestructive Inspection (NDI) or Nondestructive Evaluation (NDE). NDT encompasses a wide variety of analytical techniques used in science and industry to evaluate the properties of materials, components, subcomponents, or systems without damaging or permanently altering them.
Source: SAE Aerospace Standard AS6081 Fraudulent/Counterfeit Electronic Parts: Avoidance, Detection, Mitigation, and Disposition – Distributors
Nondestructive Testing

NDE
NDI
NDT
Nondestructive Evaluation
Nondestructive Inspection

Can also be described as Nondestructive Inspection (NDI) or Nondestructive Evaluation (NDE). NDT encompasses a wide variety of analytical techniques used in science and industry to evaluate the properties of materials, components, subcomponents, or systems without damaging or permanently altering them.
Source: SAE Aerospace Standard AS6081 Fraudulent/Counterfeit Electronic Parts: Avoidance, Detection, Mitigation, and Disposition – Distributors